Automatic Conveyor Incense Fragrance Spraying Machine (Model: HAT 33) – High-Volume Perfume Coater

Scale your post-production scenting line to massive industrial levels with the HATRI HAT 33 Automatic Conveyor Incense Spraying Machine. While drum sprayers are designed for smaller batch control, the HAT 33 utilizes a continuous feed conveyor system powered by 3 independent motors to process enormous daily volumes without production bottlenecks.

Engineered for maximum flexibility, this high-capacity spraying tunnel handles incense sticks from 8″ to 19″, sambrani cups, backflow cones, and coreless dhoop. Operators have dual-layer control over expensive perfume consumption: adjust the variable speed drive to speed up or slow down the conveyor belt, or fine-tune the pump lock valve to regulate the exact volume of atomized fragrance mist.

Technical Specifications

Key Operational Benefits for Large-Scale Factories

• Massive Continuous Throughput: Unlike batch-loaded drums that require stopping to load and unload, the continuous conveyor belt feeds products straight through the misting chamber at speeds of 150,000 to 200,000 sticks per minute, keeping pace with an entire factory floor of high-speed stick-making machines.

• Dual-Method Fragrance Precision: Control your scent concentration and oil budget in two ways:

  1. Conveyor Drive Speed: Run the belt faster for a light, economical surface scent, or slow the drive down for deep, heavy export-grade saturation.

  2. Pump Lock Valve: Partially close or open the fluid valve to restrict or increase the mist volume directly at the nozzle.

• Extended Length Capacity (8″ to 19″): Easily accommodates standard retail incense sticks as well as extra-long 19-inch ceremonial and temple sticks lying flat across the conveyor bed.

• Safe for Fragile Molded Incense: Because products travel smoothly along a flat conveyor belt without tumbling, fragile hollow sambrani cups, pointed backflow cones, and soft dhoop sticks receive 100% uniform fragrance coverage with zero risk of chipped edges or breakage.

• Heavy-Duty 3-Motor Architecture: Separating the workload across three dedicated motors ensures constant spray pressure and smooth belt movement even during 24-hour multi-shift factory operations.

Frequently Asked Questions (FAQ)

How do workers adjust the fragrance strength on the HAT 33?

Operators have two precise controls: they can adjust the variable speed drive to change how long the incense stays inside the spraying zone on the conveyor belt, and they can turn the pump lock valve to increase or decrease the liquid flow rate of the perfume spray.

What is the main difference between the HAT 33 (Conveyor) and HAT 34 (Drum)?

The HAT 34 uses rotating drums for smaller, timer-controlled batches (100 kg/hr) and is limited to 7″–12″ sticks. The HAT 33 uses a continuous conveyor powered by 3 motors for massive industrial output, handles longer sticks up to 19″, and prevents any tumbling contact on delicate sambrani cups or cones.

Can this machine spray sambrani cups and cones without breaking them?

Yes. Because the products sit stationary on the moving conveyor belt rather than tumbling inside a drum, delicate rimmed sambrani cups and sharp-tipped incense cones pass through the fragrance mist with zero mechanical impact or edge damage.

Does unused fragrance mist get wasted inside the conveyor tunnel?

No. The enclosed spraying chamber concentrates the atomized mist directly onto the moving bed of incense, while the adjustable pump lock valve ensures you only spray the exact amount of perfume required for absorption.